FTS-Series Pumps

Filtration & Tank Cleaning

Filtration Systems – 1.5″ Pumps

Flow Rates up to 55 GPM

Fuel and lube quality is critical for dependable operation and maintenance of construction and mining equipment, large trucks, buses and other vehicles. We have several products that provide superior filtration and polishing to ensure optimal quality of fuels and lube oils to meet ISO 4406 specifications for diesel and biodiesel. 

With enhanced coalescing and water separation features, our filtration systems provide a mobile platform for dealing with water in fuel, one of the most damaging challenges for fuel quality management. Removing this water helps control microbial growth in tanks. The 2 stage 8″ Aluminum housing uses a 6″ x 18″ coalescer filter and 7″ water separator to meet the engine manufacturer’s purity standards.

No Accessories Supplied for Filtration Systems. Must be purchased separately.
1.5 HP Single Phase 115V Non-Exp Models come with 50 ft of power cord.

Model Code Selector

DOWNLOADS

FTS150 & FTS200 Brochure

The Liquiflo filtration cart is a complete mobile fuel filtration solution for filtering underground and above ground storage tanks, or for on-board fuel tanks on generators, as well as agriculture and construction equipment.

The filtration cart is available as an EP (Explosion-Proof) model, designed for use in explosive environments (U.L. / C.S.A., CLASS 1. DIVISION 1. GROUP D, CLASS 2, GROUP F and G).

All models are intended for handling petroleum fluids (including diesel, bio-diesel and most lubricants).

FEATURES AND BENEFITS

  • Water Removal: Removes damaging water helping to control microbial growth in tanks. The two-stage 8″ aluminum housing uses a 6”x18” coalescer filter and 7” water separator to meet engine manufacturer’s purity standards. Coalescing and water separation efficiently removes water from fuel.
  • Particulate Removal:  The aluminum bag filter housing can pre-filter particulate down to .5 microns and the coalescer down to3 microns for fine contaminate removal. The combination provides optimal liquid filtration capable of meeting today’s stringentISO specifications.
  • Dry-Run durability – No priming necessary – just turn on the pump! Pulling fluid through an empty pipe or hose is no problem.
  • Light-weight aluminum housings make this unit easier to move around, through doorways and into hard-to-reach areas in and on top of buildings.
  • Differential gauges for bag filter and coalescer housing indicate when filters need to be changed out
  • Water sight indicator showing water content in coalescer housing
  • Filter Housing drains for draining of the system before transportation
  • Drip containment and Accessory Tubes system for keeping things clean and organized
  • Available in both Explosion-Proof and Non-Explosion-Proof models

Mobile Filtration Systems – Components

Options & Accessories

FLUID TRANSFER KIT: includes all items below (items may also be purchased separately)

Item

Purpose

  • Suction hose with camlock fittings:
    (available in 10, 20 and 30 ft lengths)
  • Discharge hose with camlock fittings:
    (available in 10, 20 and 30 ft lengths)
  • Suction drop pipe – 3 ft:
  • 1.5 inch manual discharge nozzle:
  • Allows for connection to tank or other container
  • Allows for connection to tank or other liquid source
  • Connects to hose end for filling/emptying container
  • Suitable for filling totes and containers.

FILTRATION ACCESSORIES: Items purchased separately

Item

Purpose

  • Bag filters:
    (available in .5, 1, 5, 10, 50, 100 micron mesh)
  • Cartridge filters:
    (available in pleated paper or pleated microglass in various mesh sizes)
  • Stainless steel baskets:
  • Coalescing cartridge filters:
  • Water separator filters:
  • Fuel testing kits:
  • Spill containment kits:
    (absorbent materials and containment vessels of various sizes)
  • Remove particulates and solids from line
  • Remove particulates and solids from line
  • Removes larger solids from line
  • Remove particulates and coalesce water into large water drops
  • Remove water from line
  • Detects presence of water and microbial growth
  • Containment of fluid spills

Filtration Carts can also be equipped with precision and custody meters.
Customer support includes help with questions about our products, their use and training.
Please call Liquiflo for information.

Tank Cleaning Systems – 1.5″ Pumps

Flow Rates up to 35 GPM

When storage tanks are affected by fuel additives or age, fuel quality suffers and the best way to address the problem is to clean out debris, sludge and grime from the floor and walls of the tank. The TCU can be transported easily and can be moved quickly from tank to tank, even in tight spaces. Applications include: storage tanks for rental facilities, fleet service centers, filling stations and emergency gen-sets. 

No Accessories Supplied for Tank Cleaning Systems. 
Must be purchased separately.

Model Code Selector

The Liquiflo Tank Cleaning Unit (TCU) is a complete mobile tank cleaning and fuel filtration solution for cleaning underground and aboveground storage tanks with up to 30,000 gallons storage capacity. The TCU provides a full 360⁰ cleaning of the entire internal surface area of the tank walls, and filtering the contaminated product inside the dirty tank. This eliminates product loss due to contamination.

The TCU is designed for use in explosive environments (U.L. /C.S.A., CLASS 1. DIVISION 1. GROUP D, CLASS 2, GROUP F AND G) and is intended for handling petroleum fluids (including gasoline, diesel, bio-diesel and most lubricants), and cleaning solvents.

FEATURES AND BENEFITS

  • Water Removal: Removes damaging water helping to control microbial growth in tanks. The two-stage 8″ aluminum housing uses a 6”x18” coalescer filter and 7” water separator to meet engine manufacturer’s purity standards. Coalescing and water separation efficiently removes water from fuel.
  • Particulate Removal The aluminum bag filter housing can pre-filter particulate down to .5 microns and the coalescer down to 3 microns for fine contaminate removal. The combination provides optimal liquid filtration capable of meeting today’s stringent ISO specifications.
  • Tank Cleaning: Not only can the TCU filter fluid, it can also clean the tank. Pairing the system with a tank cleaning nozzle allows for non-manned entry tank cleaning for above-ground and under-ground storage tanks. The system is designed to operate either the Gamma Jet GJ9.2 (2” access) or GJ10 (4” access) tank cleaning nozzles helping remove contaminants and breaks up dirt and sludge, allowing for extraction using the TCU filters to minimize valuable product loss.
  • Dry-Run durability – No priming necessary – just turn on the pump! Pulling fluid through an empty pipe or hose is no problem.
  • Light-weight aluminum housings make this unit easier to move around, through doorways and into hard-to-reach areas in and on top of buildings.
  • Differential gauges for bag filter and coalescer housing indicate when filters need to be changed out.
  • Pressure gauge for real-time jet head pressure reading.
  • Water sight indicator showing water content in coalescer housing.
  • Grounding Reels for safe grounding of the unit.
  • Housing drains for draining of the system for transportation.
  • Emergency stop switch makes it easy to shut down the system in a hurry.
  • Ground rod for use when additional grounding is necessary.
  • Drip containment and Accessory Tubes system for keeping things clean and organized.
  • Available in Explosion-Proof model ONLY.

Mobile Tank Cleaning Systems (Explosion-Proof) – Components

Options & Accessories

FLUID TRANSFER KIT: includes all items below (items may also be purchased separately)

Item

Purpose

  • Suction hose with camlock fittings:
    (available in 10, 20 and 30 ft lengths)
  • Discharge hose with camlock fittings:
    (available in 10, 20 and 30 ft lengths)
  • Suction drop pipe – 3 ft:
  • 1.5 inch manual discharge nozzle:
  • Allows for connection to tank or other container
  • Allows for connection to tank or other liquid source
  • Connects to hose end for filling/emptying container
  • Suitable for filling totes and containers.

FILTRATION ACCESSORIES: Items purchased separately

Item

Purpose

  • Suction hose with camlock fittings:
    (available in 10, 20 and 30 ft lengths)
  • Discharge hose with camlock fittings:
    (available in 10, 20 and 30 ft lengths)
  • Suction drop pipe – 3 ft:
  • 1.5 inch manual discharge nozzle:
  • Allows for connection to tank or other container
  • Allows for connection to tank or other liquid source
  • Connects to hose end for filling/emptying container
  • Suitable for filling totes and containers.

FILTRATION ACCESSORIES: Items purchased separately

Item

Purpose

  • Bag filters:
    (available in .5, 1, 5, 10, 50, 100 micron mesh)
  • Cartridge filters:
    (available in pleated paper or pleated microglass in various mesh sizes)
  • Stainless steel baskets:
  • Coalescing cartridge filters:
  • Water separator filters:
  • Fuel testing kits:
  • Spill containment kits:
    (absorbent materials and containment vessels of various sizes)
  • Remove particulates and solids from line
  • Remove particulates and solids from line
  • Removes larger solids from line
  • Remove particulates and coalesce water into large water drops
  • Remove water from line
  • Detects presence of water and microbial growth
  • Containment of fluid spills

TANK CLEANING ACCESSORIES: Items purchased separately

Item

Purpose

  • Debris suction drop pipe – 7 ft:
  • Fluid suction drop pipe with 2″ bung – 7 ft:
  • Gama Jet Spray Assembly with 2″ bung
    (available in 2″ and 4″ sizes)
  • Removes debris at bottom of tank before cleaning
  • Connects to hose end for filling/emptying tank
  • Removes debris and clean inside tank surface

Our Tank Cleaning Systems can also be equipped with precision and custody meters.
Customer support includes help with questions about our products, their use and training.
Please call Liquiflo for our recommendations.